3D Crystal Art and Colour Crystal Lacquer!

3D Crystal Art is an easy and exciting way to enhance and beautify any image - a card, a picture, a photograph etc. and it gives new possibilities in decoupage and rubber stamping, as well as other crafts - eg. egg decoration!
   
The special water-based lacquer is applied to a particular area, using the bottle and applicator tip, and allowed to dry for about 20 minutes. A crystal-like raised coating results and it is then possible to add additional layers as required, until a truly three dimensional finish is achieved.
   
 

                                 (1) Outline the image with a fine line of lacquer
                                 (2) Fill in the outline and leave to dry for 15-20 minutes
                                 (3) Raise the image by adding extra layers

3D Crystal Art is available in a 2oz Starter Kit (with instructions) and a 4oz Refill Bottle. The nozzles are also available separately. A range of pictures (Crystal Art Images), ready mounted on art board, can be obtained from CelCrafts - just add crystal art lacquer and put straight into a frame for the perfect gift!

3D Crystal Art Images!

There are several new Crystal Art images (pictures already mounted on art board) for you to try out - just 4 examples shown. Completed with a 3D relief crystal finish, these images make attractive pictures and gifts :

To view 3D Crystal Art products, click here :

Crystal Art Lacquer is now available in colours! If you have used the clear water-based lacquer for enhancing artwork and creating 3D pictures from Crystal Art Images and cards, you will love the extra scope of colour.
   
Colour Crystal Lacquer is available in two starter sets :
  
SET A : PRIMARY
Blue, Violet, Green, Red, Dark Brown, Yellow
  
SET B : PASTEL
Sky Blue, Yellow Green, Purple, Peach, Pink, Orange                                                                                                                 
The lacquers are available in 16 different colours, with 12 colours included in Sets A & B, as detailed above. The additional 4 colours (Black, White, Brown and Maroon) can be obtained in 1.4oz bottles from CelCrafts.

NB. Resulting from customer requests, Yellow and Red can also be obtained in 1.4oz bottles!
  
When using the colour lacquers, take a suitable rubber stamp image, for example, and outline and fill in as described above - take care not to work on areas which touch or overlap, so that the colours do not merge together. You can bring rubber stamp impressions to life or add a coloured crystal effect in egg decorating. There's no limit to the many exciting craft possibilities! The black and the opaque white lacquers give some very interesting "enamel" effects when swirled with other colours, for example.